WiFi - How to installed a wireless adapter with 8812BU chipset to capture traffic in Kali Linux by Ulises Cázares
In this post, i'll tell you how to install and use a wireless adapter that uses the RealTek 8812BU chipset in Kali linux version "Linux 5.16.0-kali7-amd64". It's very condensed and tested when I was writting this post. The steps to install: Initialize Kali Linux Open a terminal Paste the following commands, one by one sudo apt update sudo apt install -y linux-headers-$(uname -r) build-essential dkms git libelf-dev git clone https://github.com/morrownr/88x2bu-20210702.git cd 88x2bu-20210702 sudo ./install-driver.sh sudo reboot (The install may have promted you to reboot so skip this if you'have done it already) To know the adapter identifier use the command ifconfig (in this case is wlan0) The steps to use it. ifconfig wlan0 down airmon-ng check kill iwconfig wlan0 mode monitor ifconfig wlan0 up airodump-ng wlan0 !!! Even though you can capture in all channels, one at a time, it's better you focus on the one channel you want to capture traffic from....